Wi-Fi network settings
Usually, you don't need to change your settings for a Wi-Fi network; however, you might need to change
your settings if you have trouble connecting or if you need to connect manually.
The settings that are available for each Wi-Fi network depend on the type of network you're connecting
to. To find out which settings to use, if you're connecting to a home network, see the information that
came with your wireless router; if you're connecting to a work Wi-Fi network, talk to your administrator; if
you're connecting to a hotspot, see the information provided about the hotspot or talk to an employee at
the hotspot who might have details about how to connect.
The SSID is the name that the network uses to identify itself. Usually, this field is automatically
filled, but if the Wi-Fi network is hidden, you must enter the SSID to connect.
Select this check box if you want your BlackBerry device to search for an SSID that is not being
broadcast. A hidden Wi-Fi network isn't listed as an available network on the Wi-Fi screen.
Set the security type that the Wi-Fi network uses. Depending on the network you're trying to
connect to, you might also see
Security Sub Type and Inner Link Security.
If the Wi-Fi network is password protected, enter the password.
Set the root certificate that your device should use to verify that it's connecting to the correct Wi-Fi
network. Depending on the type of network you're trying to connect to, you might also see
To use a VPN Profile when connecting to the network, select the profile that you want to use.
This field is set to Dual Band by default. If the Wi-Fi network is dual-band, your device tries to
connect in the 5.0 GHz band unless the signal strength at the 2.4 GHz band is significantly
stronger. If you want to connect to a dual-band network using one band only, choose the band you
Auto Obtain IP
In most cases this switch should remain on, but if you need to manually specify an IP address for
your device you can turn off this switch and the option to enter an IP address appears.
Select this check box if you want your device to assign itself an IP address automatically when it
can't obtain one from the Wi-Fi network.
Set whether the network uses the IPV6 protocol.
Turn on this switch if you want to connect to a proxy server. When you select this setting,
additional settings appear. To find out what settings to use, see the information provided for the
Inter-Access Point Handover
If the network spans multiple access points, set whether your device should remain connected
when you move from one access point to another.